Trusted Same-Day EICR Certificate Service
Same-Day EICR Certificate in Ealing
Need a same-day landlord EICR in Ealing? We test the property's fixed wiring against BS 7671, code every observation clearly, and send you a tidy PDF certificate — usually before the engineer leaves the site.
- Fixed quote agreed before we attend, with no add-ons
- Every finding scored C1 / C2 / C3 / FI with the next step explained
- Quick digital certificate so you stay on top of compliance
Qualified, insured & competent engineers • Evening & weekend slots • Digital PDF report
Coverage
Ealing and adjacent Greater London areas
Booking Times
- Phone lines: Mon–Sun · 8am–10pm
- Call: 020 3677 6372
The EICR — what it is and what it covers
An Electrical Installation Condition Report (EICR) is the standard UK check on the safety of a property's fixed electrical installation. The inspection identifies shock and fire hazards, records each issue against a recognised code, and gives you a recommended date for the next check.
- EICR: the periodic safety inspection of installed wiring.
- EIC / Minor Works Certificate: issued after new work — confirms what's just been installed is safe and to standard.
- PAT testing: for portable, plug-in appliances rather than fixed wiring.
What's inspected and tested
We focus on the safety-critical parts of the installation:
- Consumer unit, breakers and RCDs (where fitted)
- Earthing and main protective bonding
- Cable condition — heat damage, wear and deterioration
- Sockets, switches and lighting points (and their circuits)
- Permanently wired equipment such as showers, extractors and water heaters
On the day — how it works
A clean process, sensible scheduling, and a finished report you can rely on.
Quick pre-flight
We confirm the property type, who's there, and anything we should know — recent works, recurring trips or odd behaviour.
Inspect & test
Visual inspection first, then live testing circuit by circuit. Short power isolation may be needed; we work around access.
Issue the EICR
We send the PDF report: verdict, coded findings (if any), next inspection date and practical next steps.
What you get
Everything you need to evidence compliance — packaged for landlords, agents and managed properties.
- PDF copy of the EICR, ready to share
- Clear Satisfactory or Unsatisfactory result
- Coded findings (C1 / C2 / C3 / FI) where applicable
- Recommended date for the next inspection
- Plain-English remedial guidance
Code guide — C1, C2, C3 and FI
Danger present
Immediate risk; usually made safe on the spot.
Potentially dangerous
Urgent remedial work required.
Further investigation
Must be investigated without delay.
Improvement recommended
Best-practice upgrade — not a fail on its own.
Any C1, C2 or FI makes the certificate unsatisfactory until it's dealt with. C3-only reports can still pass as satisfactory.
Got an unsatisfactory result? Here's the recovery route
Unsatisfactory means at least one item is coded C1, C2 or FI. The path back is targeted remedial work — and any further investigation — within the timeframe set out in the report.
You don't necessarily need a full fresh EICR. What you do need is written confirmation, from a qualified person, that the work has been completed and the installation is safe.
Are EICRs a legal requirement for Ealing landlords? (England)
Yes. In England's private rented sector, the fixed wiring must be inspected and tested at least once every 5 years (or sooner if the report sets an earlier date). The current report must be provided to:
- Existing tenants — within 28 days of the inspection
- New tenants — before they move in
- Prospective tenants — within 28 days of a request
- Local authority — within 7 days of a request
Required remedial work must be carried out within the timeframe specified, and written confirmation that the installation is safe should be kept on file.
EICR costs in Ealing — what affects the price
Price is driven by the real scope of the inspection. The biggest factors are:
- Property size and layout — flat, house, HMO
- Number of circuits and consumer units
- Access to sockets, lights and fixed points
- Age and condition of the installation, and how cleanly it isolates
- Whether remedial work is required (priced separately)
We quote a fixed, all-in price upfront — what we quote is what you pay, confirmed before we attend.
How long an EICR takes in Ealing
It mostly comes down to circuit count, access and any faults we find. As a practical guide:
- Small, accessible flats: around 1–2 hours
- Larger houses, multiple boards, extensions/outbuildings or limited access: several hours
Where faults turn up, investigation can extend the visit — especially when there's an FI to chase down.
Why Ealing landlords come back
Punctual visits, paperwork that's easy to act on, and honest advice when something's flagged — ideal for managed lets and ongoing compliance.
Recent job
1-bed flat
Satisfactory — next inspection date logged.
Recent job
Family home
Two C3 improvements noted; report still passes.
Recent job
Rental property
C2 fault found, repaired and signed off — written confirmation issued.
Surrounding Areas Covered
EICR certificates are also available across these areas near Ealing.
Areas we cover around Ealing
As well as Ealing, our engineers carry out EICR testing and electrical safety inspections across nearby areas including Hanwell and West Ealing.
EICR FAQs — Ealing
What is an EICR (Electrical Installation Condition Report) inspection, and what does it check?
An EICR is a formal inspection and test of a property’s fixed electrics. It typically covers the consumer unit/fuse box, wiring, socket circuits, lighting circuits, earthing and bonding, and permanently connected items (e.g., showers and extractors). It identifies fire/shock risks, records defects using C1/C2/C3/FI codes, and states a recommended next inspection date.
What does EICR stand for in electrical safety testing?
EICR stands for Electrical Installation Condition Report.
How long is an EICR valid for, and how often should it be renewed?
In England’s rented sector, the electrics must be inspected and tested at least every 5 years, or sooner if the report sets an earlier date. For owner-occupied homes, it’s commonly done around every 10 years, and also when buying/selling or before letting.
Who can carry out an EICR and issue the report?
An EICR must be completed by a qualified and competent person (typically an electrician trained in inspection and testing) with appropriate test equipment and up-to-date knowledge of BS 7671 (IET Wiring Regulations).
What makes an electrician “qualified and competent” for EICR inspection and testing?
They should be able to evidence inspection & testing competence, current understanding of BS 7671, and experience with domestic installations (consumer units, circuits, earthing/bonding, protective devices). Scheme registration (e.g., NICEIC/NAPIT-style) is a common trust signal, alongside insurance and properly maintained test gear.
Where do I find my next EICR due date?
The EICR report includes a recommended date for the next inspection and test. Many electricians also place a label on or near the consumer unit showing the next due date.
If an EICR is “unsatisfactory”, what happens next — and do I need a new EICR?
“Unsatisfactory” usually means at least one observation is coded C1, C2, or FI. Next steps are remedial work and/or further investigation within the timeframe stated (for rented homes in England: within 28 days or sooner if specified). You don’t always need a full new EICR, but you do need written confirmation from a qualified person that the required work is complete and the installation is safe.
Do landlords need a new EICR for every new tenancy?
Not necessarily. If you have a current, satisfactory EICR that’s still within date (and the next inspection date hasn’t passed), you can usually reuse it. You must provide the latest report to the new tenant before they move in.
How do I read EICR codes (C1, C2, C3, FI) and what do they mean?
- C1 = Danger present (immediate risk; may be made safe on the spot)
- C2 = Potentially dangerous (urgent remedial work required)
- FI = Further investigation required without delay
- C3 = Improvement recommended (does not fail the report on its own)
In practice, C1/C2/FI normally mean the report is unsatisfactory until addressed; C3-only reports can still be satisfactory.
How much does an EICR cost in the UK, and what are the main price factors?
EICR costs depend on the size/layout of the property, number of circuits, number of consumer units, access to sockets/lights, the age/condition of the installation, and whether isolation/testing is straightforward. Any remedial work is usually priced separately from the inspection/report.
Is an EICR a legal requirement for landlords in England (private rented sector)?
Yes. Landlords must have the electrical installation inspected and tested by a qualified person at least every 5 years, obtain a written report (EICR), and provide copies to tenants and the local authority if requested. Failure to comply can lead to financial penalties.
How long does an EICR take for a flat or house?
It mainly depends on the number of circuits, access, and installation complexity. A small, accessible flat may take 1–2 hours; larger homes, multiple consumer units, extensions/outbuildings, or access issues can take several hours.
When did EICR rules start for England’s private rented sector (key dates)?
The regulations came into force on 1 June 2020, applied to new tenancies from 1 July 2020, and applied to existing tenancies from 1 April 2021.
Schedule your Ealing EICR
Qualified, insured engineers and a quick turnaround. Call now for a free, no-obligation quote.